Bouncepad BRANCH-IP9.7-4 User Manual
Displayed below is the user manual for BRANCH-IP9.7-4 by Bouncepad which is a product in the Tablet Security Enclosures category. This manual has pages.
Related Manuals
Assembly Instructions
Branch
Wallmount
Static 60
Desk
What's in the Box
Surface Mounting
Plate x1
Surface Mounting Plate
Cover x1
Case Washer x1 Through Mounting
Washer x1
T20 Driver Bit x1
M4 Wingnut x4
M4 Split Washer x8
10mm Countersunk Screw 4x M4 Hex Nut x4
M4 20mm Buttonhead Screw x4
M4 40mm Socket Setscrew x4
No.8 38mm Countersunk Screw x4
OR
Static 60 / Branch
Stalk
Desk / Wall
Stalk 2.
What's in the Box
Tablet Support x4
Keys x2
Case x1
Faceplate x1
Tablet Setup Kit
This Tablet
Configured for
Attach case to mounting arm with hand operated
screwdriver only.
If you would like to use a different tablet in this case,
please contact us for a conversion kit.
www.bouncepad.com
Corner Pieces x4
Cable Clip x1
Sticker x1
3.
Tools for the Job
Pencil
Socket ScrewdriverHand Drill 7mm Spanner or 9/32" Wrench
16mm or 41/64" Drill Bit
5mm or 13/64" Drill Bit 2mm or 5/64" Drill Bit
4.
Recommended Installation Height
Desk
Branch
Don't install directly
beneath a light source
Avoid Glare
Wallmount Static 60
100cm / 39''
120cm / 47''
90cm / 35'' 90cm / 35''
5.
-Seemless appearance
-Requires access beneath/behind
mounting surface
-Option to route cable along surface
when there is no access beneath/
behind mounting surface
Any thickness above 25mm / 1"
Continue to p.7
Through Mount Surface Mount
up to 25mm / 1"
Choose Mounting Options
Continue to p.10
6.
Drill the Holes
Through Mounting
Washer Pencil
Front
Mark the Drill Holes
Step 1 of 4 Step 2 of 4
IMPORTANT:
Make sure the Lock will
still be accessible once
the case is installed
16mm
41/64"
5mm
13/64"
5mm
13/64"
5mm
13/64"
5mm
13/64"
Scale 1:1
Through Mount
7.
Ensure that at least 33mm
/ 1@1/4" of screw protrudes
M4 40mm Socket Setscrew
Through Mount
Screw in socket setscrews by hand
Step 3 of 4
IMPORTANT:
Line up the screws as
shown (left)
8.
Through Mount
Through Mounting Washer
M4 Split Washer x4
M4 Hex Nut/Wingnut x4
Wingnuts
Quick Assembly High Security
Hex Nuts
Fasten from behind/beneath surface
Step 4 of 4
7mm Spanner /
9/32" Wrench
Now Skip to p.14 9.
Surface Mount
Surface
Mounting Plate
Pencil
Front
Mark the Drill Holes
Step 1 of 4
10.
Surface Mount
NOTE:
The 16mm / 41/64" hole is
not required if attaching
to surface with no access
beneath as the power
cable can be routed
along the surface
Drill the Holes
Step 2 of 4
16mm
41/64"
2mm
5/64"
2mm
5/64"
2mm
5/64"
2mm
5/64"
Scale 1:1
This diagram can be
used as a drill template
11.
Surface Mount
Attach mount plate
1. Screw Mount plate onto Stalk
2. OPTIONAL Route power cable down
the Stalk and through cable channel (only
applicable if you choose to route cable
along surface)
Cable Channel
M4 10mm
Countersunk
Screws
Step 3 of 4
Surface
Mounting Plate
IMPORTANT:
Line up the screws as
shown (right)
12.
Attach to Surface
1. Screw Mounting Plate to surface
2. Remove yellow backing from Sticky Tabs
3. Slide Mounting Plate Cover over Stalk
4. Push down firmly on Mounting Plate Cover
No.8 38mm Countersunk Screws
Step 4 of 4
Surface Mounting Plate
Surface Mounting Plate Cover
Surface Mount
13.
M4 20mm Buttonhead Screws
Case Washer
M4 Split Washers
Surface Mount
14.
Route Cable
Cable Clip
Use the adhesive cable
clip to secure cable in
the nearest quadrant to
the Tablet Power Port
15.
Case Setup Cornerpieces
Tablet Supports
Sticker
16.
Insert Tablet
NOTE:
Ensure Tablet is connected
to Power Cable
17.
Lock Up
Turn Key to Lock
1.
Faceplate
Case
2.
3. 18.
Your Bouncepad is now installed
For further information and
support please contact us:
UK & International
+44 (0) 020 3693 0000
hello@bouncepad.com
www.bouncepad.com
Deutschland
+49 (0) 30 6098 5170
hallo@bouncepad.com
www.bouncepad.com/de
USA & Canada
1-617-804-0110
hi@bouncepad.com
www.bouncepad.com/us
Contact Details
UK & International
+44 (0) 020 3693 0000
hello@bouncepad.com
www.bouncepad.com
Deutschland
+49 (0) 30 6098 5170
hallo@bouncepad.com
www.bouncepad.com/de
USA & Canada
1-617-804-0110
hi@bouncepad.com
www.bouncepad.com/us